In accordance with article 1.2 13.3.6 to 13.3.8 "industrial boiler in oceania design specifications" (GB50041-92): gas-fired boiler provided in the other buildings should be not less than 3 times the amount of ventilation, ventilation hour It does not include the amount of combustion air volume. Dangerous operating room and the like between the gas regulator, the amount of ventilation per hour, should be less than 3 times, when not meet the requirements natural ventilation, mechanical ventilation should be provided, and should be less than 8 air changes per hour accident ventilation times. Fuel pump and reservoir 45 ℃ flash point less than the underground tank of combustible oil, except that natural ventilation, the fuel pump mechanical ventilation 10 air changes per hour should times, six times per hour ventilation should depot mechanical ventilation. The above three are in each room in order to ensure exclusion of air and flammable hydrocarbon disposed a predetermined minimum ventilation rate.

Selection and classification of fuel gas thermal control system fuel gas industrial boiler in oceania 1. The boiler classification thermal control system (1) electric system for an electric meter instrument cluster system consists of relays, time relays, the relay program composed of program control and interlock system; manufactured by electronic control and intelligent series or digital instruments, measuring instruments display, sound and light alarm monitoring instrumentation and control system and other components. Electric instrumentation system design experience mature, the price is cheap, but it is difficult to achieve system redundancy, remote data transmission, maintenance is more difficult, more difficult to implement advanced control methods. Electric meter system is mainly used for small boilers, but the electronic control Applications for closed-loop regulation of decreasing almost been replaced by intelligent multi-function instrument, the following sections mentioned electronic control just want to take advantage of familiar industry and the series combination of a widely used instrument that time to explain the principles of the control system configuration and (2) programmable control system programmable control system is the core of programmable logic controller (PLC). Programmable logic controllers are widely used in the initial control, since the 1990s has increased the ability of process control, the programmable logic controller in the field of process control applications more widely.

In October 2016, my company and the China Dunhuang International Hotel signed a ZWNSL2.1-1.0 / W-Y.Q vacuum condensing gas hot water industrial boiler in oceania to provide heating and hot water for the hotel. The boiler implementing the response to the national policy of environmental protection requirements and local environmental protection departments on a series of low nitrogen emission standard boiler requirements, in terms of design, manufacture, installation and other sectors have strict checks to ensure that the boiler safe and stable operation.

Gas industrial boiler in oceania safe handling as the country increasingly stringent emission standards for air pollution, the country has already started work boilers from coal to gas, out of heavily polluting coal-fired boilers, gas boilers using clean fuels. In this regard, Kono Tips boiler, gas boiler process, the need to pay attention to some safety issues: 1. burner to keep the working environment clean and dry, burner cleaning and maintenance once per shift to the control circuit must not get wet, affected by high temperature. 2. Check the electrical installations, mainly: whether the damaged wire, jacket damage, without loosening the screws, the contact is good, the motor is running any abnormal sound. 3. During normal operation, the burner portion close to thermodynamic device (such as a flange connection part) will be very hot, to avoid burns. Do not place near flammable materials, so as not to cause a fire. 4. combustor during startup, if the burner is locked repeated alarm reasons should be identified, and then identify failures and excluded press the reset button (pressing the reset button must not exceed 10 seconds), continue to start. 5. After the total gas pipeline experienced a temporary power failure solenoid valve (steel tile shed) to stop gas supply will automatically shut down until the first call burner electric alarm device to send, then a small hammer solenoid valve with total on hand to pull, you must first send electricity to manually open solenoid valve, solenoid valve will be closed and vice versa total. 6. fireman not mess-tune the burner, abnormal promptly notify management personnel, approved by management and then make adjustments. 7. In the long-term shutdown state, to do maintenance work on the boiler equipment, for each transmission parts to clean, lubricate.